LPC-P2129 PROTOTYPE BOARD FOR LPC2129 ARM7TDMI-S MICROCONTROLLER

FEATURES:

• MCU: LPC2129 16/32 bit ARM7TDMI-S™ with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x CAN, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• three on board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current
• single power supply: +7-9VDC required
• power supply status LED
• power supply filtering capacitor
• two channel RS232 interface with two RS232 SUB-D 9 pin connectors
• two channel CAN interface with drivers and two SUB-D 9 pin connectors
• iButton interface circuit
• Frequency input connector
• two buttons
• two status LEDs
• Potentiometer connected to AIN
• RESET circuit with exterman control of Philips ISP utility via RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET vontrol by RS232
• 10 Mhz crystal
• extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 115x80 mm (4.5x3.2")

• LPC-P2129.chm

• LPC-P212x schematic REV-B

• RS232 initialization demo code
• Blink LED demo code
• RapidiTTy Lite development IDE from TTE Systems example with LPC-P2129 and ARM-USB-OCD
• OpenOCD + Eclipse set of projects 1.00 include flash write make file for LPC-P2129. The complete list of projects included is here.

ORDERING CODES:
		LPC-P2129 - assembled and tested board, includes LPC2129 microcontroller