LPC-P1343 DEVELOPMENT PROTOTYPE BOARD FOR LPC1343 CORTEX M3 ARM MICROCONTROLLER

MICROCONTROLLER FEATURES:

• LPC1343 Cortex-M3, up to 72 Mhz
• 32 kB Flash, 8kB SRAM,
• UART RS-485, two SSP, I2C/Fast+
• USB
• 42 GPIO pins,
• 4 TIMERS/COUNETRS, CAPTURE,
• WDT
• Serial Wire Debug.
• High-current output driver (20 mA) on one pin.
• High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
• Integrated Power Management Unit, Three reduced power modes: Sleep, Deep-sleep, and Deep power-down.
• Single 3.3 V power supply (2.0 V to 3.6 V).
• 10-bit ADC with input multiplexing among 8 pins.
• GPIO pins can be used as edge and level sensitive interrupt sources.
  

BOARD FEATURES:

• MCU: LPC1343 Cortex-M3, up to 72 Mhz, 32 kB Flash, 8kB SRAM, UART RS-485, two SSP, I2C/Fast+, ADC
• Power supply circuit
• Power-on led
• USB connector
• Debug interface – SWD (Serial Wire Debug)
• UEXT connector
• Eight user leds
• Two user buttons
• Reset button
• Prototype area
• FR-4, 1.5 mm, soldermask, component print
• Dimensions:80x50mm (3.15 x 1.97")

DOCUMENTS:

• LPC-P1343.pdf users manual
• Getting started with the LPC-P1343 using GNU tools by Alessandro Rubini with source code: git://gnudd.com/cortex-m3.git http://gnudd.com/pub/cortex-m3/cortex-m3-v2011-03-20.tar.gz
• LPC-P1343 demo examples: blink LEDs, interrupts, buttons, USB virtual com port
  
  

• LPC-P1343 schematic
• ARM JTAG connector (TOP view)

• LPC1343 demo examples project for EW-ARM

PROJECTS/REVIEW:

• http://gadgetengineering.wordpress.com/category/olimex-lpc-p1343/

ORDERING CODES:
		LPC-P1343 - completely assembled and tested board, includes LPC1343 microcontroller