FEATURES:

• MCU: LPC2106 16/32 bit ARM7TDMI-S™ with 128K Bytes Program Flash, 64K Bytes RAM, RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• DIL40 housing, so user can use existing sockets on prototype boards
• two on board voltage regulators 1.8V and 3.3V with up to 800mA current
• single power supply: +5-9VDC required
• RESET, DBGSEL, RTCK pullup resistors
• 14.7456 Mhz crystal allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock)
• possibility for external clock-in
• power supply filtering capacitor
• extension headers for P0.0-P0.31, DBGSEL, RST, RTCK, XIN, +3.3V_OUT, GND
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 51x20 mm (2.0x0.75")
• space between the pin rows: 15.24 mm (0.6")

• LPC-H2106.pdf
• LPC-H2106.chm

• Schematic

• BLINK LED at P0.x - C source code (Rowley's CrossConnect), C source code (IAR EWARM) and compiled HEX code which can be programmed with Philips' Flash ISP utility
• SAKAMOTO YASUHIRO's mother board for LPC-H40 source codes for LCD display and lot of useful information for LPC2106
• OpenOCD + Eclipse set of projects 1.00 include flash write make file for LPC-H2106. The complete list of projects included is here.

ORDERING CODES:
		LPC-H2106 - assembled and tested board, includes LPC2106 microcontroller