FEATURES:

• MCU: EP9302 ARM920T 200Mhz, 16+16KB instruction and data cache, MMU, SDRAM, SRAM, FLASH external bus controller 100Mhz bus, 100Mbit Ethernet MAC, two UARTS, two USB 2.0 ports, IrDA, ADC, SPI, I2S Audio, AC97, DMA 12 ch, RTC, dual PLL, WDT, 2- 16 bit, 1- 32 bit TIMERS, boot ROM, interrupt controller,
• external SDRAM 32MB (16MB x16bit) 7.5 ns /133Mhz
• external Flash 16MB (8MB x16 bit) 80 ns
• ETHERNET 10/100 PHY KS8721BL
• 2 x RS232 drivers and connectors
• 2 x USB host connectors
• SD/MMC card
• IrDA transciever on board
• UEXT connector with I2C, SPI, RS232 and power supply for connecting add-on modules like RF link, MP3, etc available from Olimex
• JTAG interface
• ADC extension port
• power supply plug in jack
• Linux 2.4, Linux 2.6 and NetBSD sources and pre-build images ready to load with Redboot are available on the supplement CD
• dimensions: 110x90 mm (4.3 x 3.5")

• CS-E9302.pdf - users manual

HARDWARE:

• CS-E9302-REV.B schematic (current revision)
• CS-E9302-schematic (old revision with KSZ8721BL PHY)
• CS-E9301-schematic (old with CS8952 PHY)

• CD with Linux 2.4, NetBSD and Linux 2.6 sources and images for Linux 2.4 and NetBSD are shipped with each board, each board will be shipped pre-loaded with Linux 2.6 in the internal flash
• Linux Kernel patch for SD-MMC support provided by Peter Ivanov

ORDERING CODES:/
		CS-E9302 Completely assembled and tested with 200Mhz EP9302 microcontroller. This board have OEM pricing for volume orders, please call.