FEATURES:

• STK200 compatible ICSP 5x2 pin connector for in-circuit programming with AVR-PG1 or AVR-PG2
• RS232 Tx, Rx interface with MAX232 IC on socket
• 8 MHz crystal on socket (user can replace with any value)
• reset IC ZM33064
• reset button
• general purpose push button
• status LED connected to PC5 via removable jumper
• DIL28 microcontroller socket
• Power plug-in jack
• selectable +3.3V / +5V power supply voltage regulator
• extension pin headers for each uC pin
• four mounting holes 3.3 mm (0.13")
• GND bus
• Vcc bus
• FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• dimensions 100x80 mm (3.9x3.15")

DOCUMENTS:

• AVR-P28.pdf user manual

HARDWARE:

• AVR-P28 schematic
• AVR-P28 ICSP connector

• AVR-P28 + ATmega8 Blinkng LED (C source and HEX)
• AVR-P28 + ATmega8 UART demo (C source and HEX)
• AVR-P28 + ATmega8 Button demo (C source and HEX)
• AVR-P28 project by Landon Cox

ORDERING CODES:
		AVR-P28-8MHz completely assembled and tested with 8Mhz oscillator
		AVR-P28/PCB ONLY